https://blumotix.it/wp-content/uploads/2021/11/Ambientata-Attuatore-di-commutazione.jpg

Flush-mounted actuators

Flush-mounted actuator 1 channel and 3 inputsBX-CI01

The new BLUMOTIX flush-mount actuators are part of the KNX Secure devices.

BX-CI01 is a 1 module 16 A KNX on/off actuator. The actuator is also equipped with two inputs for mounting in a box for switches. They can be connected to potential-free contacts. The two inputs can be locked independently or play various functions. It also has an additional input allowing for example the connection of remote temperature probe (NTC).

Technical features

  • Output via KNX telegrams or controllable external control inputs
  • Three external control inputs on connection of deenergised contacts or condensate/leakage sensors.
  • NTC temperature sensor connectable to input 3
  • Sensor R25°C 33 KΩ – B25/100 4300K
  • Power supply via KNX, no additional supply voltage required
  • Compatible with KNX Data Secure

KNX functions

  • NC contact and NO contact operation
  • Feed-back function
  • Connection and forced-run function
  • Central switching functions
  • Timed functions: on/off delay, staircase light switch with pre-warning function
  • Scenario function
  • Hour counter
  • Control function Switching
  • Control function Brightness adjustment (colour temperature control included)
  • Venetian blind control function
  • Switching control function Transducer (1 byte, 2 bytes, 3 bytes and 6 bytes, default values for RGBW and colour temperature included)
  • Control function scenario activation
  • Control function 2-channel control
  • Control function External control of a controller
  • Blocking functions
  • Adjustable suppression time

Multifunctional flush-mounted actuator 2 channels and 3 inputsBX-CI02

The new BLUMOTIX recessed actuators are part of the KNX Secure category.

BX-CI02 is a switch actuator, 2 channels / actuator for blinds, 1channel. The actuator is also equipped with two inputs for mounting in one box for switches. They can be connected to potential-free contacts. The two inputs can be locked independently or play various functions. It also has an additional binary input allowing for example the connection of a remote temperature probe (NTC).

Technical features

  • Output via KNX telegrams or controllable external control inputs
  • Three external control inputs on connection of deenergised contacts or condensate/leakage sensors.
  • NTC temperature sensor connectable to input 3
  • Sensor R25°C 33 KΩ – B25/100 4300K
  • Power supply via KNX, no additional supply voltage required
  • Compatible with KNX Data Secure

External control input features

  • Control function Switching
  • Control function Brightness adjustment (colour temperature control included)
  • Venetian blind control function
  • Switching control function Transducer (1 byte, 2 bytes, 3 bytes and 6 bytes, default values for RGBW and colour temperature included)
  • Control function scenario activation
  • Control function 2-channel control
  • Control function External control of a controller
  • Blocking functions
  • Adjustable suppression time

Switch functions

  • NC contact and NO contact operation
  • Feed-back function
  • Connection and forced-run function
  • Central switching functions with collective feed-back
  • Timed functions: on/off delay, staircase light switch with pre-warning function
  • Scenario function
  • Hour counter

Venetian blind mode properties

  • Suitable for AC 110…230 V motors
  • Operating modes “Venetian blind with slats”, “Roller shutter/ awning”, “Window ventilation/roof window”
  • Directly controlled blind position
  • Direct slat position adjustment possible
  • Feedback of motion status, blind position and slat position
  • Forced position for superordinate control
  • Safety function: 3 independent wind alarms, rain alarm, frost alarm
  • Sun protection function with automatic heating/cooling
  • Blocking function (blocking protection)
  • Scenario function

Contact us for a quote

OUR SERVICESWhy choose Blumotix

Blumotix designs, develops and manufactures KNX devices for the automation of fully constructed buildings and
assembled in Italy, combining innovation and technology with the elegance of Italian Design.

Blumotix srl
Via Bedazzo, 2
48022 Lugo (RA) – Italy
tel. +39 0545 1895254

P.I. 02136200397
Cap. soc. € 70.000 i.v.

https://blumotix.it/wp-content/uploads/2021/11/por-fesr-ue-ri-regione-er.jpg

© 2022 Blumotix srl. All rights reserved.
Website made by Arkimedia Communication.