https://blumotix.it/wp-content/uploads/2021/11/Ambientata-Attuatore-di-commutazione.jpg

Shutters/Venetian blind actuators

2-channel roller shutter/Venetian blind actuatorBX-BLD2

The BX-BLD2 is an actuator for 2 roller shutters with relay outputs 16 A 230 V ac, 50/60 Hz, KNX standard, DIN rail installation (60715 TH35); it occupies 4 x 17.5 mm modules. The roller shutter / venetian blind actuator controls independent 230 V ac drives for the control and operation of roller shutters, venetian blinds, roller blinds and blackout blinds. The devices are powered by the bus and do not require an external auxiliary voltage; the output contacts are interlocked and potential-free in order to protect the drives from damage.

Technical features

  • Input voltage: 230 V ac, 50/60 Hz
  • Power supply: KNX bus, 29 V dc SELV
  • Consumption on bus: 12 mA
  • 2 independent outputs
  • Rated current IN: 16 A
  • Operating Temperature: -5 ÷ +45 °C (internal use)
  • Connection to the BUS: coupling terminal, 2 pins, d=0,8 mm
  • Electric connections: screw terminals, max. cable section 5 mm2 (AWG10)
  • Degree of protection: IP 20
  • Dimensions: 4 DIN modules

Connections

The connection to the bus and to the shutter control devices is made directly via the terminals on the front of the actuator.

KNX functions

  • Full up and down run
  • Partial run with stop in position from 0 to 100% of the run length
  • Position setting (change of preset position during operation)
  • Slat tilt adjustment (for blinds)
  • Insertion into scenarios
  • Automatic control for protection from direct sunlight
  • Automatic control for protection against weather conditions (rain, wind, frost)

4-channel roller shutter/Venetian blind actuatorBX-BLD4

The BX-BLD4 is an actuator for 4 roller shutters with relay outputs 16 A 230 V ac, 50/60 Hz, KNX standard, DIN rail installation (60715 TH35); it occupies 4 x 17.5 mm modules. The roller shutter / venetian blind actuator controls independent 230 V ac drives for the control and operation of roller shutters, venetian blinds, roller blinds and blackout blinds. The devices are powered by the bus and do not require an external auxiliary voltage; the output contacts are interlocked and potential-free in order to protect the drives from damage.

Technical features

  • Input voltage: 230 V ac, 50/60 Hz
  • Power supply: KNX bus, 29 V dc SELV
  • Consumption on bus: 12 mA
  • 4 independent outputs
  • Rated current IN: 16 A
  • Operating Temperature: -5 ÷ +45 °C (internal use)
  • Connection to the BUS: coupling terminal, 2 pins, d=0,8 mm
  • Electric connections: screw terminals, max. cable section 5 mm2 (AWG10)
  • Degree of protection: IP 20
  • Dimensions: 8 DIN modules

Connections

The connection to the bus and to the shutter control devices is made directly via the terminals on the front of the actuator.

KNX functions

  • Full up and down run
  • Partial run with stop in position from 0 to 100% of the run length
  • Position setting (change of preset position during operation)
  • Slat tilt adjustment (for blinds)
  • Insertion into scenarios
  • Automatic control for protection from direct sunlight
  • Automatic control for protection against weather conditions (rain, wind, frost)

Blind/roller shutter actuator 6 channelsBX-BLD6

The BX-BLD6 is an actuator for 6 roller shutters with relay outputs 16 A 230 V ac, 50/60 Hz, KNX standard, DIN rail installation (60715 TH35); it occupies 4 x 17.5 mm modules. The roller shutter / venetian blind actuator controls independent 230 V ac drives for the control and operation of roller shutters, venetian blinds, roller blinds and blackout blinds. The devices are powered by the bus and do not require an external auxiliary voltage; the output contacts are interlocked and potential-free in order to protect the drives from damage.

Technical features

  • Input voltage: 230 V ac, 50/60 Hz
  • Power supply: KNX bus, 29 V dc SELV
  • Consumption on bus: 12 mA
  • 6 independent outputs
  • Rated current IN: 16 A
  • Operating Temperature: -5 ÷ +45 °C (internal use)
  • Connection to the BUS: coupling terminal, 2 pins, d=0,8 mm
  • Electric connections: screw terminals, max. cable section 5 mm2 (AWG10)
  • Degree of protection: IP 20
  • Dimensions: 8 DIN modules

Connections

The connection to the bus and to the shutter control devices is made directly via the terminals on the front of the actuator.

KNX functions

  • Full up and down run
  • Partial run with stop in position from 0 to 100% of the run length
  • Position setting (change of preset position during operation)
  • Slat tilt adjustment (for blinds)
  • Insertion into scenarios
  • Automatic control for protection from direct sunlight
  • Automatic control for protection against weather conditions (rain, wind, frost)

Contact us for a quote

OUR SERVICESWhy choose Blumotix

Blumotix designs, develops and manufactures KNX devices for the automation of fully constructed buildings and
assembled in Italy, combining innovation and technology with the elegance of Italian Design.

Blumotix srl
Via Bedazzo, 2
48022 Lugo (RA) – Italy
tel. +39 0545 1895254

P.I. 02136200397
Cap. soc. € 70.000 i.v.

https://blumotix.it/wp-content/uploads/2021/11/por-fesr-ue-ri-regione-er.jpg

© 2022 Blumotix srl. All rights reserved.
Website made by Arkimedia Communication.