Switch actuators
12-channel switching actuator BX-ACT12
The BX-ACT12 is a 12-channel DIN rail-mounted load actuator for independent switching of loads by means of closing contacts. The 230 V ac switching output can be controlled by push buttons on the front. A green LED indicates the status of the channel. It features 16 A bi-stable relays with contacts connected directly to the terminals, without phase sharing.
The screw terminals can accept cable sections of up to 5 mm2. The relays used can withstand an inrush current of up to 320 A in the first 2 ms, making them particularly suitable for controlling inductive loads such as fluorescent or neon lamps.
The screw terminals can accept cable sections of up to 5 mm2. The relays used can withstand an inrush current of up to 320 A in the first 2 ms, making them particularly suitable for controlling inductive loads such as fluorescent or neon lamps.
Technical features
- Input voltage: 230 V ac, 50/60 Hz
- Power supply: KNX bus, 29 V dc SELV
- Current consumption by KNX bus: 12 mA
- Rated current of contacts: 16 A
- Operating Temperature: -5 ÷ +45 °C (internal use)
- Connection to the BUS: coupling terminal, 2 pins, d=0,8 mm
- Electric connections: screw terminals, max. cable section 5 mm2 (AWG10)
- Degree of protection: IP 20
- Dimensions: 8 DIN modules
KNX functions
- Switching function
- Staircase light function
- Scenario function
- Logic functions: 16 generic logic operators are available to be assigned to the desired channels
- Channel status feedback
8-channel switching actuatorBX-ACT08
The BX-ACT08 is an 8-channel load actuator for DIN rail mounting, for independent switching of loads via the closing contacts. The 230 V ac switching output can be controlled by push buttons on the front. A green LED indicates the status of the channel. It features 16 A bi-stable relays with contacts connected directly to the terminals, without phase sharing.
The screw terminals can accommodate cable sections up to 5 mm2. The relays used can withstand an inrush current of up to 320 A in the first 2 ms, making them particularly suitable for controlling inductive loads such as fluorescent or neon lamps.
The screw terminals can accommodate cable sections up to 5 mm2. The relays used can withstand an inrush current of up to 320 A in the first 2 ms, making them particularly suitable for controlling inductive loads such as fluorescent or neon lamps.
Technical features
- Input voltage: 230 V ac, 50/60 Hz
- Power supply: KNX bus, 29 V dc SELV
- Current consumption by KNX bus: 12 mA
- Rated current of contacts: 16 A
- Operating Temperature: -5 ÷ +45 °C (internal use)
- Connection to the BUS: coupling terminal, 2 pins, d=0,8 mm
- Electric connections: screw terminals, max. cable section 5 mm2 (AWG10)
- Degree of protection: IP 20
- Dimensions: 8 DIN modules
KNX functions
- Switching function
- Staircase light function
- Scenario function
- Logic functions: 16 generic logic operators are available to be assigned to the desired channels
- Channel status feedback
4-channel switching actuator BX-ACT04
The BX-ACT04 is a 4-channel load actuator for DIN rail mounting, for independent switching of loads via the closing contacts. The 230 V ac switching output can be controlled via push buttons on the front. A green LED indicates the status of the channel. It features 16A bi-stable relays with contacts connected directly to the terminals, without phase sharing.
The screw terminals can accommodate cable sections up to 5 mm2. The relays used can withstand an inrush current of up to 320 A in the first 2 ms, making them particularly suitable for controlling inductive loads typical of fluorescent or neon lamps.
The screw terminals can accommodate cable sections up to 5 mm2. The relays used can withstand an inrush current of up to 320 A in the first 2 ms, making them particularly suitable for controlling inductive loads typical of fluorescent or neon lamps.
Technical features
- Input voltage: 230 V ac, 50/60 Hz
- Power supply: KNX bus, 29 V dc SELV
- Current consumption by KNX bus: 12 mA
- Rated current of contacts: 16 A
- Operating Temperature: -5 ÷ +45 °C (internal use)
- Connection to the BUS: coupling terminal, 2 pins, d=0,8 mm
- Electric connections: screw terminals, max. cable section 5 mm2 (AWG10)
- Degree of protection: IP 20
- Dimensions: 4 DIN modules
KNX functions
- Switching function
- Staircase light function
- Scenario function
- Logic functions: 16 generic logic operators are available to be assigned to the desired channels
- Channel status feedback
Contact us for a quote
OUR SERVICESWhy choose Blumotix
Blumotix designs, develops and manufactures KNX devices for the automation of fully constructed buildings and
assembled in Italy, combining innovation and technology with the elegance of Italian Design.
assembled in Italy, combining innovation and technology with the elegance of Italian Design.
Blumotix srl
Via Bedazzo, 2
48022 Lugo (RA) – Italy
tel. +39 0545 1895254
P.I. 02136200397
Cap. soc. € 70.000 i.v.
© 2022 Blumotix srl. All rights reserved.
Website made by Arkimedia Communication.
