https://blumotix.it/wp-content/uploads/2021/11/Sensori-e-rilevatori-di-movimento.jpg

Motion detectors

The range of Blumotix motion and presence sensors makes it possible to automate the control of bus functions, such as room lighting or air-conditioning. All versions contain a KNX communication module within. The presence sensors are connected to the signal-bus cable. The configuration and commissioning of the devices is conducted using the ETS software.

Motion detectorsBX-514-01 - BX-514-03

BX-514-01 and BX-514-03 are KNX presence sensors. Specifically, the BX-514-01 finds applications for medium heights, while the BX-514-03 for wide-range applications. They are both multifunctional devices suitable for indoor use and they include for each an independent presence channel that can be used with constant light switch functionality and constant light controller functionality. There are an independent on-board actuation channel and 2 digital inputs. The presence channels are independent and can be configured in automatic or semiautomatic mode according to the user’s needs. They also support the functionality of sensor without presence channels for simple uses. It includes a temperature probe for measuring it with functionality of thermostatting, all available via bus, and it also includes 5 independent logic blocks to create logical associations, they can be associated with “AND”, “OR” and “XOR” logic*. The conditions of the logic inputs contain presence, brightness, motion and external conditions. The sensor can also be configured as a master or slave.

Technical features

  • Passive infrared sensor technology
  • Power supply: via KNX bus, 29 V dc SELV
  • Mounting height 2.5 m – 4 m
  • Bus current consumption: 5 mA
  • Brightness detection 1-1200 lux
  • Inputs: 2 digital inputs
  • Output: 1 analog input
  • Maximum air humidity % 90 RH
  • Connection to the KNX BUS: coupling terminal, 2 pins, d=0,8 mm
  • Protection type:
    • Flush mounting: IP 20
    • Surface mounting: IP 44
  • Operating temperature: -5 ÷ +45 °C (internal use)
  • Storage (-10°C…60°C)
  • Dimensions: 70 × 41.8 mm (Φ x H)

KNX functions

It supports presence detection, brightness detection, motion detection, indoor and outdoor temperature detection. The presence detection, based on passive infrared sensor, has 1 channel independently configurable with constant light switch and constant light control application. There are 5 logic blocks available that can be set in the AND/OR/XOR logic relationship. Each block can control 5 objects output.

External devices can be connected through the 2 digital inputs and 1 analog input. Switching sensor, switching/dimming sensor, shutter sensor, value/forced operation, scene control, RGB color control can be carried out with the buttons connected to the inputs.

Temperature measurement by built-in sensor with the possibility of sending the value to change and periodically to the bus for room temperature monitoring. The device also integrates Virtual Badge.

The presence sensor takes over the distances for people sitting, approaching and crossing detection; the fields are of different sizes. The detection range of the detector varies depending on the mounting height. With the constant light controller function: the detector maintains brightness at a constant value and dims lights to the relative intensity, according to the surrounding brightness.

Radio frequency motion detectorBX-DET01

Concealed motion detector for installation above false ceilings or recessed. It can also be installed in masonry walls, wood, plasterboard etc. It allows a wide and easy parameterization by ETS, being suitable for lighting, people detection and anti-break in functions. Radio frequency technology.

Technical features

  • Detection area 2,5 m from the floor: Guaranteed 6×3 m/Maximum: 12×6 m
  • Power: 29 V dc from auxiliary power supply or from KNX BUS
  • Auxiliary power supply of 12 ÷ 30 V dc (recommended), 35 mA from the auxiliary power supply, 1 mA from KNX BUS
  • Safety low-voltage SELV, direct current 24 V
  • Consumption depending on the source
  • BUS KNX (Optional) 35mA from BUS KNX
  • Mounting: on false ceilings or recessed in plasterboard and brick walls
  • Operating Temperature: -5 ÷ +45 °C (internal use)
  • Type of protection: IP20
  • Dimensions: 25 x 45 x 65 mm
  • Weight: 115 g
https://blumotix.it/wp-content/uploads/2021/11/BX-DET01-320x320.jpg

Download

Motion DetectorBX-93382

KNX presence and brightness detector with infrared technology, in false ceiling version, suitable for detection in offices, meeting rooms, schools, hotel rooms and entirely made of white polycarbonate. Equipped with a special optical system, suitable for detecting even the smallest movements, with 360° detection area and can be installed up to a height of 5m. Constant brightness adjustment and control outputs for HVAC, operating temperature: -5 ÷ +45 °C (indoor use)
https://blumotix.it/wp-content/uploads/2021/11/BX-93382-320x320.jpg

Download

Motion DetectorBX-93383

KNX presence and brightness detector with infrared technology, in semi-recessed version, can also be ceiling mounted with base code 93307, suitable for detecting in offices, meeting rooms, schools, hotel rooms and made entirely of white polycarbonate. Featuring a special optical system suitable for detecting even the smallest movements, with a 360° detection area and installable up to a height of 5 metres. Constant brightness adjustment and control outputs for HVAC, operating temperature: -5 ÷ +45 °C (indoor use).
https://blumotix.it/wp-content/uploads/2021/11/BX-93383-320x320.jpg

Download

Motion DetectorBX-93384

KNX presence and brightness detector with infrared technology, in false ceiling version, for large detection areas, entirely made of white polycarbonate. Featuring a special optical system suitable for detecting even the smallest movements, with 360° detection area and can be installed up to a height of 10m. Constant brightness adjustment and control outputs for HVAC, operating temperature: -5 ÷ +45 °C (indoor use).
https://blumotix.it/wp-content/uploads/2021/11/BX-93384-320x320.jpg

Download

Motion DetectorBX-93385

KNX presence and brightness detector with infrared technology, in semi-recessed version, for large detection areas, made entirely of white polycarbonate. Featuring a special optical system suitable for detecting even the smallest movements, with a 360° detection area that can be installed up to a height of 10 metres. Constant brightness adjustment and control outputs for HVAC, operating temperature: -5 ÷ +45 °C (indoor use).
https://blumotix.it/wp-content/uploads/2021/11/BX-93384-320x320.jpg

Download

Contact us for a quote

OUR SERVICESWhy choose Blumotix

Blumotix designs, develops and manufactures KNX devices for the automation of fully constructed buildings and
assembled in Italy, combining innovation and technology with the elegance of Italian Design.

Blumotix srl
Via Bedazzo, 2
48022 Lugo (RA) – Italy
tel. +39 0545 1895254

P.I. 02136200397
Cap. soc. € 70.000 i.v.

https://blumotix.it/wp-content/uploads/2021/11/por-fesr-ue-ri-regione-er.jpg

© 2022 Blumotix srl. All rights reserved.
Website made by Arkimedia Communication.