System components
Devices to give life to KNX standard Blumotix home automation systems.
POWER SUPPLYBX-PS640
BX-PS640UL
BX-PS1280
BX-PS1280, BX-PS640 (CE certified), and BXPS640UL (CE and UL certified) are KNX power supplies providing output currents of 1280 mA and 640 mA respectively. They feature high efficiency and compact design. All models are equipped with protection against overloads, short circuits and output overvoltage. The devices include one KNX output with a choke and an additional auxiliary power output. Diagnostic LEDs indicate normal operation status, overload and overvoltage conditions and
RESET status.
RESET status.
TECHNICAL DATA – BX-PS1280
- Input voltage: 200 ÷ 240 V AC, 50/60 Hz
- Input current: 0.5 A at 230 V AC
- Operating temperature: -5 °C ÷ +45 °C (indoor use)
- KNX bus connection: 2-pole plug-in terminal (d = 0.8 mm)
- Electrical connections: screw terminal, max cable section 2.5 mm²
- Protection rating: IP20
- Dimensions: 4 DIN modules
TECHNICAL DATA – BX-PS640 (CE certified) and BX-PS640UL (CE and UL certified)
- Input voltage: 100 ÷ 240 V AC, 50/60 Hz
- Input current: 0.25 A at 230 V AC
- Operating temperature: -5 °C ÷ +45 °C (indoor use)
- KNX bus connection: 2-pole plug-in terminal (d = 0.8 mm)
- Electrical connections: screw terminal, max cable section 2.5 mm²
- Protection rating: IP20
- Dimensions: 4 DIN modules
- Type: Power supply units
Power Supply - General purpose 12V/15WBX-PW15
BX-PW15-24
Designed specifically for powering Touch Panels, this device is particularly suitable for Kairos 27, Theo 10, and Kronos 4 models. The power supply operates with input voltages ranging from 100 to 240 V AC.
Technical features
- Input voltage: 100 ÷ 240 V AC, 50/60 Hz
- Output voltage: 12 V DC (BX-PW15), 24 V DC (BX-PW15-24)
- Maximum power: 15 W
- Insulation: Class II
- Operating temperature: -5 ÷ +45 °C (indoor use)
- Operating humidity: max. 93% (non-condensing)
- Electrical connections: screw terminal, max cable section 2.5 mm²
- Protection rating: IP30
IP/KNX Secure InterfaceBX-IP02
Interface device between a KNX line and an IP (Internet Protocol) network. BX-IP02 is the ideal KNX secure interface for programming the system with ETS via an active network connection on your PC (EIBnet/IP standard Tunneling). It supports the latest KNX Secure technology. The IP address of the interface can be assigned manually through ETS or automatically if a DHCP service is active on the network. BX-IP02 features an RJ45 connector for IP connection, a standard KNX connector (2 x 0.8 mm) for bus line connection, and a third connector (2 x 0.8 mm) for auxiliary power supply (12–24 V DC).
TECHNICAL DATA
- Ethernet interface: 10 Mb
- Supported protocols: ARP – ICMP – IGMP – UDP/
IP – DHCP – EIBnet/IP compliant with KNX: Core,
Tunneling, Device Management - Operating temperature: -5 ÷ +45 °C (indoor use)
LINE COUPLERBX-LC02
BX-LC02 is an area/line coupler which interconnects two KNX data transmission lines ensuring galvanic decoupling between them. Each bus line of a KNX installation can operate independently of the other areas/lines.
BX-LC02 supports KNX Data Secure communication (KNX Data Secure telegrams can be processed and filtered according to settings).
BX-LC02 supports KNX Data Secure communication (KNX Data Secure telegrams can be processed and filtered according to settings).
USB INTERFACEBX-DINUSB
BX-DINUSB is a DIN-rail KNX interface for KNX / USB bi-directional communication that allows you to connect to a bus line with your PC. The USB connection is galvanically isolated from the KNX bus. Ideal for the use of the ETS software, both for programming and for data monitoring sessions.
Technical features
- PC connection to KNX systems.
- Addressing, programming and KNX device diagnostics.
- Compatible with KNX Data Secure products.
- Quick download of applications (Long Frame support from ETS5).
- Compatible with ETS4, ETS5 (and higher).
USB INTERFACEBX-USB
BX-USB is a two-way KNX communication interface KNX / USB that allows to connect your PC to a bus line. The USB connection is galvanically isolated from the KNX bus. Ideal for the use of ETS software, both during programming and for data monitoring sessions. Compatible with KNX Association Falcon driver.
Technical features
- Compatibility: ETS3 and later – Falcon
- Power consumption: USB 200mw – KNX 100mw
- Dimensions (L1-L2-H): 90-91-12 mm
TERMINALSBX-SP01
BX-SP01 is the box of 50 KNX connectors. These are connectors for applications that comply with the European Installation Bus (EIB) standart and allow communication between the device and the KNX bus.
Technical features
- Number of contacts: 8
- Number of potentials: 2
- Min wire dimensions: 22AWG
- Max wire dimensions: 18AWG
- Rated voltage: 100VAC
- Maximum current: 6A
KNX CABLEBX-SP05/06
BX-SP05/06 is the 100-meter skein of KNX 4/2 pole cable. The cable is made with 2 twisted cables of 0.8 mm section, shielded with AI/Pet tape, not propagating fire and low halogen emission.
Technical features
- Cable 2 x 2 x 0,80 mm
- Conductor: annealed copper (cl. 1)
- Insulation: PVC quality R2
- Separator: Pet tape
- Drainage: tinned copper annealed (formation 1 x 0,40 mm)
- Shielding: Al/Pet tape
- Sheath: PVC quality RZ
- Sheath colour: RAL 6018
- Reduced halogen emission: <22%
- Capacity according to: <100 pF/m at 10 KHz
- Inductance: <0,85 uH/m at 10 KHz
- Rated voltage: 300V
- Maximum voltage: 330V
- Test voltage: 4000V
- Temp. Max exercise: 70 °C
- Short-circuit temp. 160 °C
- Temp. Installation: 0 °C
- Radius of curvature: 53mm
The cable is composed of:
- Holder
- Insulation
- Separator
- Shielding
- Drainage
- Sheath
Contact us for a quote
OUR SERVICESWhy choose Blumotix
Blumotix designs, develops and manufactures KNX devices for the automation of fully constructed buildings and assembled in Italy, combining innovation and technology with the elegance of Italian Design.
Blumotix srl
Via Bedazzo, 2
48022 Lugo (RA) – Italy
tel. +39 0545 1895254
P.I. 02136200397
Cap. soc. € 70.000 i.v.
